Skip to content
SIMAQ
Walk-behind double-drum roller SQRDWB L34
SQRDWB L34

Walk-behind double-drum roller SQRDWB L34

Double vibrating drum for asphalt and base.

EngineHONDA GX390 13 HP / 3600 RPM

Get a quote for this machine

Leave your name and phone: a specialist in your country will text or call you.

Your country*
A specialist contacts you during business hours (Mon–Fri 8:00–17:00 / Sat 8:00–12:00).

SIMAQ advantages

  • Front and rear water sprinkler so asphalt won't stick
  • Hydraulic steering on the front drum
  • Integrated control lever and lifting point for safe hoisting
  • 68 cm drum with 17 kN centrifugal force: more output per pass

Features

  • Double drum
  • Walk-behind

Specifications

Drum width
680MM
Speed
0-3.5 KM/H
Impact force
17 KN
Hydraulic pump
DANFOSS
Weight
0.84 t
Compaction frequency
65 Hz
Walk-behind double-drum roller SQRDWB L34 — on the job

SIMAQ on the job

Proven on the real jobsite

Double vibrating drum for asphalt and base.

5-minute training

5 min

How to use the walk-behind roller

The roller compacts in wide lanes and leaves a smooth surface: that's why it's used on base, sub-base, walkways, parking lots and asphalt patching. The walk-behind fits where a big roller won't; for a whole street, a ride-on is the better fit.

  1. 01

    Check and refill

    Engine, hydraulic and fuel levels. Fill the water tank and confirm spray on both drums.

  2. 02

    Start with vibration off

    Position the machine, bring the engine to full throttle, and only then engage vibration (it won't kick in at low rpm). Move the travel lever smoothly.

  3. 03

    First pass depends on the material

    On asphalt, the first pass goes without vibration to bed the mix; then vibrate to densify. On granular base, you can vibrate from the first pass.

  4. 04

    Overlap a third of the drum

    Each lane covers a third of the previous one. Roll forward and back on the same line at a steady speed for an even finish.

  5. 05

    Kill vibration before stopping, finish static

    Switch vibration off before braking or reversing. To finish, make one pass without vibration to erase marks and leave a smooth surface.

Do this

  • Keep the sprinkler open on asphalt so it won't stick.
  • Work at a steady speed: not crawling, not racing.
  • If the soil is clay → use a padfoot roller or a rammer: a smooth drum won't knead cohesive soil.
  • Use the lifting point to load and unload it.

Avoid this

  • Don't leave it vibrating stationary on asphalt: it dents it.
  • Don't vibrate near a slab, pipe or structure without assessing.
  • Don't roll asphalt with the water tank empty.
  • Don't forget the brake when parking on a slope.

Safety

  • Boots, gloves, glasses and hearing protection.
  • Mind your feet: the drum doesn't stop on a dime.
  • Watch the handle pinch point on turns.

Calculate before you quote

Applications

What jobs this machine is built for.

  • Road bases and sub-bases
  • Trench and pipe backfill
  • Paving and interlock
  • Embankments and pads
  • Asphalt finishing

Frequently asked

Which compactor do I need for my soil?

Vibratory plate for granular soil, pavers and open areas; rammer (jumping-jack) for trenches and cohesive soils; roller for large areas and asphalt. Tell us the job and we'll recommend the machine.

Diesel, gasoline or electric?

Gasoline (Honda) for general, portable use; diesel for heavy duty and rollers; electric where emissions aren't allowed. All run world-brand engines.

Does it include warranty and parts?

Yes: 6-month SIMAQ warranty, parts and local after-sales at every distributor (ConstruMarket — CMARKET in Guatemala).

How do I get a quote?

Through the form or WhatsApp — reply during business hours. For volume, request a wholesale / container quote.

Ready for a quote?

Tell us about the job and we'll build the package. A rep replies during business hours.

Walk-behind double-drum roller SQRDWB L34 · SQRDWB L34

Customer reviews

No reviews for this equipment yet. If you use it, tell others how it's going.