Official factory breakdown
Parts for SQRVA6M PRO
52 parts for the 6 m vibrating screed SQRVA6M PRO, with SIMAQ code, quantity per machine and spec where the manual provides it.
- Parts
- 52
- Wear items
- 11
- Manual
- SQRVZL6MOM-2026-A

Engine maintenance
Honda GX270
The engine consumables replaced at every service. The spark plug is listed by its manufacturer reference, not the engine part number, because that one varies by variant.
- Spark plug
- BPR6ES (NGK) · W20EPR-U (DENSO)
- Plug gap
- 0,7–0,8 mm
- Engine oil
- SAE 10W-30, API SJ o superior
- Oil capacity
- 1,1 L
- Fuel tank
- 5,3 L
- Valve clearance (cold)
- Intake 0,15 ± 0,02 mm · Exhaust 0,20 ± 0,02 mm
For any other engine part, have the code stamped on the engine plate at hand: the same model has variants and part numbers differ between them. Send us that code and we'll confirm the part.
Exploded diagram
The number on the drawing is the same # in the table.
52 parts in the official breakdown.
| SIMAQ code | Part | Qty | Spec | Order |
|---|---|---|---|---|
| #1 | FK UCP 205 Bearing Seat | 8 | — | Order |
| #2 | Eccentric Block | 8 | — | Order |
| #3 | Eccentric Shaft 1 | 3 | — | Order |
| #4 | 6×25 Flat Key | 6 | — | Order |
| #5 | Coupling | 2 | — | Order |
| #6 | Universal Coupling | 1 | — | Order |
| #7 | Rubber φ75×45 | 10 | — | Order |
| #8 | Hooked Shoe | 2 | — | Order |
| #9 | Small Trolley Wheel | 2 | — | Order |
| #10 | No. 6.3 Angle (63×63 mm) | 2 | — | Order |
| #11 | Straight Shoe | 16 | — | Order |
| #12 | Inclined Shoe | 15 | — | Order |
| #13 | Vibrator Upper Beam 60×40 mm | 2 | — | Order |
| #14 | Channel Support (Structural Channel) | 8 | — | Order |
| #15 | No. 5 Angle (50×50 mm) | 2 | — | Order |
| #16 | Scalene Angle 75×50 mm | 2 | — | Order |
| #17 | Rubber Shoe | 2 | — | Order |
| #18 | Cable Quadrant Support | 2 | — | Order |
| #19 | Cable Quadrant | 2 | — | Order |
| #20 | Bent Plate | 2 | — | Order |
| #21 | M20 Square Tube Connection Bolt | 2 | — | Order |
| #22 | 6×40 Spring Pin | 8 | — | Order |
| #23 | 8×25 Flat Key | 2 | — | Order |
| #24 | Outer Clutch | 1 | — | Order |
| #25 | Eccentric Shaft 2 | 1 | — | Order |
| #26 | M20 Square Tube Connection Set | 1 | — | Order |
| #27 | M20 Square Tube Connection Nuts | 2 | — | Order |
| #28 | Angle Connection Plate | 4 | — | Order |
| #29 | Belt Cover | 1 | — | Order |
| #30 | A- 1000 Belt | 2 | — | Order |
| #31 | Clutch Assembly | 1 | — | Order |
| #32 | Motor | 1 | — | Order |
| #33 | Motor Plate | 1 | — | Order |
| #34 | Motor Shoe | 1 | — | Order |
| #35 | M10×35 Hex Bolt | 18 | — | Order |
| #36 | M10×40 Hex Bolt | 16 | — | Order |
| #37 | M10×45 Hex Bolt | 20 | — | Order |
| #38 | M10×50 Hex Bolt | 4 | — | Order |
| #39 | M10×55 Hex Bolt | 8 | — | Order |
| #40 | M10×65 Hex Bolt | 19 | — | Order |
| #41 | M10×70 Hex Bolt | 2 | — | Order |
| #42 | M10×80 Hex Bolt 2 | — | — | Order |
| #43 | M10 Safety Nut 81 | — | — | Order |
| #44 | M10 Standard Flat Washer 162 | — | — | Order |
| #45 | M10 Spring Washer 81 | — | — | Order |
| #46 | M10 Safety Nut 4 | — | — | Order |
| #47 | M10 Large Flat Washer 1 | — | — | Order |
| #48 | M12 Large Flat Washer 4 | — | — | Order |
| #49 | M12 Standard Flat Washer 18 | — | — | Order |
| #50 | M12 Spring Washer 20 | — | — | Order |
| #51 | M12 Safety Nut 20 | — | — | Order |
| #52 | 8×16 Hex Bolt 8 | — | — | Order |
Breakdowns in the same family
Category: Concrete · All breakdowns
