SQ36 PRO
Power trowel SQ36 PRO
Mirror slab finish, on schedule.
View details
Premium lineSQ36DOUBLE PRO
Ride-on double power trowel SQ36DOUBLE PRO
Mirror slab finish, on schedule.
EngineHonda GX690
Compare with another machineParts available for this machineBuy it from ConstruMarket in El Salvador
Features
- Steel blades
- Operator-presence seat sensor
Specifications
- Power
- 13 kW (20 HP)
- Engine
- Gasolina, enfriado por aire, dos cilindros, cuatro tiempos
- Blade size
- 360 × 195 mm (8 en total)
SIMAQ on the job
Proven on the real jobsite
Mirror slab finish, on schedule.
Anatomy of the machine
Premium parts of the machine
Hover the dots —or tap them— to explore each component and why it matters.
Auto tour
5-minute training
5 minHow to use the power trowel
The power trowel gives the slab its smooth or mirror finish. It's all about timing: get on when the concrete is just right, not before, not after. If the slab sets unevenly (sun on one side, shade on the other), start where it's furthest along.
- 01
Wait for the set
The slab should hold your footprint at ~3–5 mm. If you sink deeper, wait; if it barely marks, get on now with the pan.
- 02
Float pan first
Fit the float pan for the first floating: it closes the surface and levels without marking. Even, overlapping sweeps.
- 03
Switch to blades to finish
Remove the pan and fit the blades. Raise the pitch a little each pass to keep closing and bringing up the shine; raise it all at once and the blades gouge.
- 04
Cross your passes
Run one direction, then perpendicular. Crossing erases waves and leaves it truly flat.
- 05
Edges by hand
Where the machine can't reach —edges and corners— finish by hand trowel so it matches.
Do this
- Keep a steady pace; control is in your wrists.
- Adjust blade pitch gradually, pass by pass.
- If one area sets before the rest → start there.
- Keep spare blades ready: they wear out.
Avoid this
- Don't get on too early: you sink it and ruin the level.
- Don't wait too long: hard concrete won't take a finish.
- Don't throw water on the slab to 'revive' it: it weakens the surface.
- Don't leave it spinning in place on the slab.
Safety
- Rubber boots, knee pads for edges and gloves.
- Firm grip on the handle: the spin torque pulls the machine.
- Switch off before lifting or moving the trowel.
Applications
What jobs this machine is built for.
- Slabs and floor decks
- Columns and walls (vibration)
- Floor finishing (troweling)
- On-site concrete mixing
- Concrete paving
Frequently asked
What mixer capacity do I need?
By sacks per batch: 1.5 sacks for small crews and remodels; 2 sacks for continuous work. Available in gasoline and electric.
Gasoline or electric vibrator?
Gasoline for off-grid or high-mobility work; electric for interiors and fine vibration. Quick hose coupling for the element you're pouring.
Walk-behind or ride-on trowel?
Walk-behind (SQ36) for medium slabs and edges; ride-on (twin) for large surfaces and output. Both deliver a mirror finish.
Warranty, parts and quote?
6-month warranty, parts in stock and local after-sales. Quote via form or WhatsApp, same-day reply.
Ready for a quote?
Tell us about the job and we'll build the package. Same-day reply.
Ride-on double power trowel SQ36DOUBLE PRO · SQ36DOUBLE PRO
Customer reviews
No reviews for this equipment yet. If you use it, tell others how it's going.